Cuchilla PEEK para bomba de freno de automóvil
Cuchilla PEEK para bomba de freno de automóvil

Cuchilla PEEK para bomba de freno de automóvil

El PEEK tiene buena resistencia a la fatiga dinámica y a la corrosión bajo operación a alta temperatura, y tiene una excelente resistencia al desgaste en condiciones sin lubricación.

1: Wear-resistant sleeve for automobile water pump

The car water pump is responsible for regulating the coolant within a certain range to ensure the normal operation of the engine.

When rotating at high speed, it comes into contact with the seal, housing, and coolant, and is constantly worn. The PEEK-5600CF30 sleeve has self-lubricating properties.

Wear and corrosion resistance, fully competent and effectively increase the service life of the pump body.

2: High temperature wear-resistant sleeve

High temperature wear-resistant bushings have excellent wear resistance, very low friction coefficient, and high PV value, and are very suitable for wear resistance and harsh conditions.

3: Brake pump blade

It is an excellent metal with good dynamic fatigue resistance, corrosion resistance and good wear resistance under high temperature conditions.

4: Automobile water pump gear

Compared with conventional gears, metal gears are 70% lighter and have an 80% lower moment of inertia. They are resistant to a variety of automotive fluids and can maintain high mechanical properties in a wide temperature range from -40 degrees to 250 degrees.

5: PAI pellets for engines

PAI has excellent dimensional properties at high temperatures, good wear and friction properties, high strength, corrosion resistance, self-lubrication, and small thermal expansion coefficient. It is used in automobile engine fuel systems.

6: Gearbox PAI thrust washer

It is a type of engine sliding bearing. It is used to prevent the crankshaft from direct friction with the engine body while ensuring the crankshaft is turning, and also to prevent the axial movement of the crankshaft. It mainly supports the axial direction of the crankshaft inside the engine, and has high requirements for material hardness and wear resistance. Using PAI as a thrust washer has high strength, excellent dimensional performance at high temperature, good wear resistance and friction performance, self-lubrication, and small thermal expansion coefficient.

7: Move the unit and its attachments

It has good impact resistance, can maintain its toughness and strength for a long time, and has good chemical corrosion resistance.

*
*
*

Recomendaciones Relacionadas